Tyco Marine 601P-M Optical Smoke Detector
The Tyco 601P-M Smoke Detector (516.600.201) is capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc; or smoke produced by overheated but unburnt PVC.
This Tyco Smoke Detector is particularly suitable for general applications and areas where cable overheating may occur, e.g. electrical services areas. Optical only Detectors are not suitable for detecting fast burning fires producing little visible smoke or very black smoke.
Optical only detectors are not suitable for detecting fast burning fires producing little visible smoke or very black smoke. The novel design of the asymmetrical sampling chamber and signal processing techniques stop unwanted alarms caused by very small insects, i.e. thrips. Smoke entering the sampling chamber scatters the infra-red light pulses onto a photodiode.
Key Features:
Approved by all major classification societies for use on vessels
EN54 Approved from LPCB
Low operational voltage: 10.5 Vdc to 33 Vdc
Aesthetically discreet
Superior performance and reliability
Designed for rapid installation
Wiring polarity independent
| 601P-M | |
| Weight | 93 g |
| Material | FR 110 Bayblend fire-proof material |
| Working temp. | -20 to +70℃ |
| Stock temp. | -25t o +80℃ |
| Relative humidity | 95% (no condensation) |
| Static current | 65ua |
| Alarm current | 45mA |
| Voltage | 10.5-33DVC |
